Who does spreader stoppies? This guy. Who does them intentionally? Not this guy!<br />
<br />
So last night me and a buddy were riding through town, and coming up on a light I decided I'd do a small bullshit stoppie. I don't roll them as I don't have a stabilizer, but I do roll them just enough to where I can set the asd end down without it just slamming. Anyway, coming up to the light I didn't slow down as much as usual (like I said, planned on a little stupid stoppie). Got side tracked and wound up too close to the light, kept with my plans, and grabbed the front brake. I thought I was going over, flew out of my seat and up into the air, and threw my legs out so they could get around the bars and I wouldn't eat road. Well, I landed on the tank when I reached was almost at peak height, rolled maybe a foot in the spreader position, then the ass end came down (I let off the brake almost entirely). I think it's safe to say I'm never having kids. <br />
<br />
But anyway, what's a good stabilizer? I ride an 09 zx6r if that matters. And once I do finish getting the bike all set up, throw me some good stoppie tips. How high is high enough, how to get it up without slamming on brakes etc. I'm a big dude, like 6'4&quot; and 350ish. My arms are sore from last nights incident, but I think that's mostly because I was holding myself in the air unexpectedly. Any tips are appreciated.

I bought a project f4/f4i fully converted bike to make a lot bike but can't get it to run. Motor has compression, fuel pump turns on but I can't get any spark. I am tired of trying this and that already so its getting parted out. List of parts are as follows: <br />
<br />
1). 2000 cbr f4 frame with clear title - $650+shipping<br />
2). F4i motor w/ good compression. No starter - $350 as is!<br />
3). F4i guages - $150+shipping<br />
4). F4i headlight - $150+shipping<br />
5). F4i split seat Subframe - $200+shipping<br />
6). F4i front seat - $45+shipping<br />
7). F4i rear seat - $75+shipping<br />
8). 900rr front end (forks w/good seals, front wheel no tire, rotors, calipers, brake hose, upper and lower triple trees, and stock clip ons) - $350+shipping<br />
9). F4i upper fairing stay - $85+shipping<br />
10). F4i split seat tail fairing - $100+shipping<br />
11). F4i rear wheel no sprocket, hub, rotor, or tire - $100+shipping<br />
12). F4i swingarm - $50+shipping<br />
13). F4i left front rearset bracket with shift linkage and kick plate no lever, no peg - $50<br />
14). F4i right front rearset bracket w/kick plate no brake lever - $50+shipping<br />
15). F4i brake lever $25+shipping<br />
16). F4i shift lever $25+shipping<br />
17). F4i split seat battery tray - $40+shipping<br />
18). F4i tail-light $35+shipping<br />
19). F4i gas tank with a minor dent or two clean no rust $100+shipping<br />
20). F4i fuel pump - $150+shipping<br />
21). F4i aftermarket gas cap with key $25+shipping<br />
22). F4i wire harness complete except no relays $150+shipping<br />
23). F4i rear shock - $45+shipping<br />
24). F4i left passenger rearset with peg - $35+shipping<br />
25). F4i right side passenger rearset with peg - $35+shipping<br />
26). F4i left side clip on switches - $40+shipping<br />
27). F4i right side clip on switches - $40+shipping<br />
28). F4i throttle cables - $25+shipping<br />
29). F4i rectifier - $50+shipping<br />
30). F4i stator - $100+shipping<br />
31). F4i airbox - $50+shipping<br />
32). F4i rear seat linkage with cable - $35+shipping<br />
33). F4i left side ram air duct - $25+shipping<br />
34). F4i right side ram air duct - $25+shipping <br />
35). F4i smoke windscreen $30+shipping<br />
36). F4i rear rotor $35+shipping<br />
37). F4i sprocket hub with cush drives - $25+shipping<br />
38). F4i exhaust header stock - $50+shipping<br />
39). F4i spark plug coul set - $50+shipping<br />
40). F4i front seat latch - $10+shipping<br />
<br />
Pm me for pics if needed...

I decided to take the dirtbike for a spin today, and I was doing pretty decent sitdowns so I decided to give one handers a try. I think I did a few ok ones, but my problem is I'm chasing them out because I'm below BP... And I'm below BP because if I'm not hanging on the bars, I start slipping off the seat!<br />
<br />
What's the secret?<img src="images/legacy/smilies/shruggs.gif" border="0" alt="" title="Shruggs" class="inlineimg" />

sorry this isnt a bike build but some may think its cool... Needed to take a break from stunting due to injury and other reasons so i decided to waste my time and money on this to keep from riding. a turbo mustang build... the car is about finished and honestly all i can think about is riding and building my next bike!!! dont worry the 2k13 stunt project is being budgeted!!!<br />
<br />
bought this for $1500 bone stock 95 gt<br />
<img src="http://i297.photobucket.com/albums/mm239/2wheelkilla/IMAG0403.jpg" border="0" alt="" /><br />
<br />
Tear down<br />
<img src="http://i297.photobucket.com/albums/mm239/2wheelkilla/IMAG0457.jpg" border="0" alt="" /><br />
<img src="http://i297.photobucket.com/albums/mm239/2wheelkilla/IMAG0479.jpg" border="0" alt="" /><br />
new go fast part<br />
<img src="http://i297.photobucket.com/albums/mm239/2wheelkilla/IMAG0474.jpg" border="0" alt="" /><br />
<br />
basement full of parts<br />
<br />
<img src="http://i297.photobucket.com/albums/mm239/2wheelkilla/IMAG0481.jpg" border="0" alt="" /><br />
<br />
mock up<br />
<img src="http://i297.photobucket.com/albums/mm239/2wheelkilla/IMAG0500.jpg" border="0" alt="" /><br />
<br />
going in<br />
<img src="http://i297.photobucket.com/albums/mm239/2wheelkilla/IMAG0516.jpg" border="0" alt="" /><br />
<br />
in <br />
<img src="http://i297.photobucket.com/albums/mm239/2wheelkilla/IMAG0556.jpg" border="0" alt="" />

Keep posting these pics.

what up?! anyone from the area?

New thread.... post your emails along with original add fucking with people. <br />
<br />
<b>TRADE a 2010 Honda CBR1000rr Exhaust and Headers for....?? (Channahon)</b><br />
<br />
Date: 2012-07-18, 6:48PM CDT<br />
Reply to: <a href="mailto:jnhch-3148391433@sale.craigslist.org">jnhch-3148391433@sale.craigslist.org</a> [<a href="http://www.craigslist.org/about/help/replying_to_posts" target="_blank">Errors when replying to ads?</a>] <br />
I am looking to trade the stock exhaust and headers from my 2010 Honda CBR1000rr for something cool or cash. I am not looking for anything specifically so make me an offer and the worst I can say is no. There is also not a specific cash amount I am looking for either so just shoot me a number! <br />
<br />
<br />
<br />
<font color="Red">MY REPLY: </font><br />
<br />
I have some high quality porn that me and an ex GF made with the HD camera that we had newly purchased and were trying out. We're broke up now and I have showed it to all my buddies so I have no use for it anymore.<br />
<br />
<br />
<br />
<br />
let me know

Just picked up a HB set up. Streetfighterz edition dual cal bracket (single piston/four piston), 80in. line, gsxr master, and both calipers. Would like to sell as a set if possible. Asking $250 plus shipping.

Thought these turned out pretty awesome...figured i'd share them<img src="images/legacy/smilies/cheers.gif" border="0" alt="" title="Cheers" class="inlineimg" /><br />
<br />
<img src="http://i1097.photobucket.com/albums/g358/Petrina_Bertini_Photography/cartoonrecklessryancopy-1.jpg" border="0" alt="" /><br />
<img src="http://i1097.photobucket.com/albums/g358/Petrina_Bertini_Photography/jbstuntcartooncopy-1.jpg" border="0" alt="" /><br />
<img src="http://i1097.photobucket.com/albums/g358/Petrina_Bertini_Photography/zachcartooncopy-1.jpg" border="0" alt="" /><br />
<img src="http://i1097.photobucket.com/albums/g358/Petrina_Bertini_Photography/ruthlesscartooncopy-1.jpg" border="0" alt="" /><br />
<img src="http://i1097.photobucket.com/albums/g358/Petrina_Bertini_Photography/dizzlecartooncopy-1.jpg" border="0" alt="" />

hey all been awhile...sooo i just picked up an 08 zx6r for cheap looking to stunt it out I'm new with kawis any mods i should know about&gt;? and also who makes parts for the 08 most i can find is impacktech for cage and sub cage