Okay so I am trying to really start making progress and going to be riding every night (or try).<br />
<br />
I started to try a new thing tonight for the first time. Doing a wheelie (foot in seat) and then lifting my foot off of the foot brake and just kinda letting it float in the air. I noticed me feeling very uncomfortable because of how much pressure my left foot was receiving and also a lot of stress on my arms. I did it for a bit but with all the stress I started to get a wobble.<br />
<br />
What I am curious about is how you guys do it with such smoothness. <br />
<br />
Should I try seat stander and then removing my foot? Also I assume keeping the bike up past bp would also help with smoothing it out? or am I wrong?<br />
<br />
Any tips would be greatly appreciated! I want to start moving around on the bike!

anyone think jb weld will hold on a crack shaped like a half moon little bigger than a quarter on an oil pan? ghetto fix to get back out and save a couple hundo and a headache

<div align="center">Hello , Name is -V- and Id like to be the first to tell you about the new &quot;DRS&quot; Dual Ratio Sprocket from 12 O Clock Performance. <br />
<br />
The DRS allows changing gear ratios on the Fly, with nothing more than a 10mm Allen wrench. Perfect for Stunters!<br />
<img src="http://dualratiosprockets.com/home/images/uploads/2012/01/DRS.gif" border="0" alt="" /><br />
<br />
For more info please visit <a href="http://dualratiosprockets.com/" target="_blank"><font size="4">Dual Ratio Sprockets</font></a></div>

Names Taylor! I'm from Texas and new to this forum! I ride an 07 Yamaha fz1 but bleed gixxers always! Here's me and my bike!

So I can just about double my aproach from a 120foot run up and I really want to see if I can stretch it further so I'm keen to hear from those who can, or those who've seen them do it <img src="images/legacy/smilies/shocked.gif" border="0" alt="" title="Shocked" class="inlineimg" />)<br />
<br />
things I do so far:<br />
<br />
<ol class="decimal"><li>suspension = basically all on hard?</li>
<li>steering damper up to max?</li>
<li>Bang it straight from full power to hard on brake - get as high as quick as possible.</li>
<li>bend in arms or straight arms - what difference does it make?</li>
</ol>What's the best way to practice the lauch?<br />
What's the best way to practice getting closer to BP? i.e.<br />
Does BP change with speed? Until recently I've always assumed it was lower @ higher speed and higher at lower speeds...<br />
<br />
<br />
any ideas tips or help well welcome!!! <img src="images/legacy/smilies/cheers.gif" border="0" alt="" title="Cheers" class="inlineimg" />

looking for a site to get some stunt parts for my new toy..help a bruva out

I was talking with Zeus_R6 the other day about ordering some nice HT moto seat covers through his shop and getting my rear seat done so I can start doing FIS... Then he told me what HT moto charges to do the stunt seat! Well, from what I heat, HT moto seats are the best of the best, so if you have the $$, then maybe you should just get one. As for me, try as I might, whenever I sit on the toilet only one thing comes out of my ass and it ain't money!<img src="images/legacy/smilies/LolLolLolLol.gif" border="0" alt="" title="LOL" class="inlineimg" /><br />
<br />
So I did a little reading and decided I would attempt doing the mod myself. I got a yard of heavy duty textured vinyl from the local upholstery shop, and we had the foam lying around in the shop.<br />
<br />
A little note on the foam. It is my understanding that you want the highest density foam you can get. I would also imagine you would want pretty firm foam. The high density will make it less prone to braking down. The foam I used it pretty light density but the material seems durable. I'm a little concerned about it collapsing after a while, but it's what I had so I guess I'll see ho it turns out. The point is if you are ordering some, go for high density!<br />
<br />
Now on to the fun. Here is the seat how it came on the bike.<br />
<br />
<img src="http://stuntride.com/vbstunt/attachment.php?attachmentid=15708&amp;stc=1&amp;d=1342375397" border="0" alt="" /><br />
<br />
First thing is to pull the staples from the cover and get it off.<br />
<br />
<img src="http://stuntride.com/vbstunt/attachment.php?attachmentid=15709&amp;stc=1&amp;d=1342375397" border="0" alt="" /><br />
<br />
Then I cut a hole in the seat with a dremel and cutoff wheel. Wear eye pro, unless you want to catch molten plastic in your eye!<br />
<br />
<img src="http://stuntride.com/vbstunt/attachment.php?attachmentid=15710&amp;stc=1&amp;d=1342375397" border="0" alt="" /><br />
<br />
Next, I flipped over the seat pan and traced it onto the foam.<br />
<br />
<img src="http://stuntride.com/vbstunt/attachment.php?attachmentid=15711&amp;stc=1&amp;d=1342375397" border="0" alt="" /><br />
<br />
Both sides cutout. I used a bandsaw because I had it and I'm lazy, but a knife works surprisingly well at cutting this stuff.<br />
<br />
<img src="http://stuntride.com/vbstunt/attachment.php?attachmentid=15712&amp;stc=1&amp;d=1342375397" border="0" alt="" /><br />
<br />
More to come...

What are you guys using for gas caps? I rode my 2012 KX450F SM for the first time today and had 2 problems...One was the oil breather spitting out oil after wheelies, but thats a simple fix I knew I was going to need a catch can for it...<br />
<br />
The other is my gas cap, leaking like crazy after wheelies or stoppies...I hate gas balls...<img src="images/legacy/smilies/banghead.gif" border="0" alt="" title="Banghead" class="inlineimg" /> So what are you guys using for a gas cap? I dont even think it was coming out of the breather, it seems like it was out around the nipple in the cap that the breather is on....<img src="images/legacy/smilies/shruggs.gif" border="0" alt="" title="Shruggs" class="inlineimg" />

several people have been blowin up facebook with this new wheelie law going into effect jan 1st 2013. assuming we get a halfway decent day in january im bundling up and hittin streets son! STREETS!!! im gonna eat a starburst while i do it too. <br />
<br />
quote from local radio station website-<br />
&quot;So if you ride a motorcycle, chances are you may have tried to pull a wheelie or two in your day.<br />
<br />
Maybe you’re crazy enough to pull one on the highway, because you’re a badass.<br />
<br />
Well, if a cop sees you doing that now, you’re gonna get pulled over.Governer Pat Quinn took the time out from fixing the economy to sign into a law a provision that says if you get caught doing a wheelie by the cops, they’re going to give you a $100 fine.<br />
<br />
If you get caught popping another wheelie, you’re going to get up to six months in jail and a $1500 fine.<br />
<br />
Three times and you’re facing a year in jail and a $2500 fine. Imagine explaining to all your best jail friends that you’re behind bars for popping three wheelies on the highway.<br />
<br />
Don’t get me wrong, popping wheelies on a motorcycle is dangerous, let alone at 80mph; but it’s hardly stupid enough to be imprisoned for.<br />
<br />
Oh PS – another provision is that you have to keep at least one hand on the handlebars at all times while riding.<br />
<br />
To recap: one hand on the handlebars at all times, and no wheelies, but you still don’t have a to wear a helmet.<br />
<br />
Glad they took the time to focus on important state matters.&quot;

I Wana ride with a female ride that stunt sounds fun<img src="images/legacy/smilies/LolLolLolLol.gif" border="0" alt="" title="LOL" class="inlineimg" />