636 ?

[nj636]

Originally Posted by old man roger

ya what he said

thanks for the help

[JOHNNYSTUNTS]

what kinda breather should i get.. to let air flow but not oil??

[klos]

I got a valve cover breather from autozone

[636squid]

Is oild coming out, I never had a problem with the motor.

[Stubbz63]

personally i would look or buy 2 new factory covers and replace the block off plates so you can hookup the T fitting, unless your not riding in the lot with the bike or if its just gonna be a streetbike then i wouldnt bother with it.

[troy]

do yall have any pics of the the t fitting way i have mean like the post pic my bogs low idle when you go to cluch it

[Stubbz63]

make sure you capped off the vacumm line that comes off the stock T valve. some guys remove the stock T valve and hook it up that way and others remove the stock T and put in a plastic or brass plumbing style of T fitting, thats what i did but not sure if it will make a difference

[nj636]

Originally Posted by Stubbz63

make sure you capped off the vacumm line that comes off the stock T valve. some guys remove the stock T valve and hook it up that way and others remove the stock T and put in a plastic or brass plumbing style of T fitting, thats what i did but not sure if it will make a difference

I left the valve, capped off the vacuum line.. no difference and
less work than putting a brass/plastic T

2 1/2' of 1/2" hose from the crankcase to the valve works beautifully. put two hose clamps, cap the airbox and your done.

[troy]

the way i did it i left the stock t fit on the head cover and ran a holes from the back to front left stock there the two 1/2 pipe and the 1/8 plug in cap the air box off is that ok or do i need do something else

[old man roger]

Originally Posted by troy

the way i did it i left the stock t fit on the head cover and ran a holes from the back to front left stock there the two 1/2 pipe and the 1/8 plug in cap the air box off is that ok or do i need do something else

the big hose should look like this



and then unplug and stick a long bolt in hose ''A''



and then block off the holes in your airbox