Posts: 12
Threads: 3
Joined: May 2013
Reputation:
0
i had an issue quite similar to this, was a loose wire in the ignition, soldered it back on good and it ran like a champ
Posts: 324
Threads: 15
Joined: Sep 2010
Reputation:
0
Check the kill switch, wires there may be getting a bad connection. Try bypassing kickstand too. Could be numerous things loose, but I'd check those.
Posts: 6
Threads: 1
Joined: Jan 2009
Reputation:
0
yea im gonna check the wiring on the ignition and the kill switch. i already bypass the kickstand and checked the wire on it
Posts: 25
Threads: 2
Joined: Feb 2010
Reputation:
0
sort of having same issue, grounded something out in the ignition connector, now bike will turn over but fuel pump won't prime but it does work when jumped but bike still won't start. going to check the start stop next but anyone else have any ideas this is the second time this has happened miraculously fixed its self last time.
Posts: 67
Threads: 4
Joined: May 2010
Reputation:
0
Could be the fuel pump relay switch also? Dose the fuel pump relay click every time you turn the ignition on and off?
If the fuel pump relay is defiantly clicking every time you turn the key on and off then you know you need to start tracking ignition wires and other possibility's.
If the fuel pump relay isn't clicking pull the turn signal relay and swap it and try turning it on and off again and see if that solves the problem.
Posts: 25
Threads: 2
Joined: Feb 2010
Reputation:
0
Don't think so and can say most likely not. where is the switch. The start switch relay does for sure though
Posts: 25
Threads: 2
Joined: Feb 2010
Reputation:
0
Defiantly does not relay is good
Posts: 25
Threads: 2
Joined: Feb 2010
Reputation:
0
Defiantly does not ,relay is good
Posts: 25
Threads: 2
Joined: Feb 2010
Reputation:
0
Sorry bout the confusion. No the fuel relay doesn't click. The turn signal stuff is long gone.
