Less than 1 minute ago
\r\n \r\n
\r\n \r\n
\r\n
true once they are saturated no wash will take out the fluid. i know this seems janky but only way ive found works is pull pads out and get a torch and heat them up and it will evaporate the fluid. i know it is not the right way but pads are expensive and were all trying to save a buck all of my friends and i have done it and still have no problems. o and brake clean the rotors and and lightly scuff them with scotch brite or light grit sand paper\r\n
Quote:
\r\n | \r\n \r\n \r\n Originally Posted by Doodle\r\n \r\n  \r\n brake fluid will ruin the pads,as will fork fluid..if either have came in contact it will make them not as effective..swap the pads and brake fluid...a brake overhaul is never a bad idear. \r\n \r\n | \r\n