11-09-2011, 07:22 PM
so here's what i did....hack job 101:
i bought an 07 R6R (R6V) front end. I used the 07 triples, forks, calipers, and rotors. The wheel and axle were the same. then i broke a fork, and scooped up a 03-04 636 front end for nothing
i continued to use the 07 r6r triples, and just slid the 636 forks in with the kawi wheel, rotors, calipers etc. 05 triples are nice because they're beveled to run clip ons on top as opposed to the 07 where you have to run clip ons underneath. THE RAKE OF THE 05 AND 07 TRIPLES ARE DIFFERENT. i tried running an 07 lower and 05 upper, and the wheel was practically on the radiator. as for your issue, using 636 triples, i think you can call or look up the conversion bearings on ALL BALLS website, if you want use those. i think superdave was running 05-06 triples back in the day. but yea...good luck, hope this was helpful 
i bought an 07 R6R (R6V) front end. I used the 07 triples, forks, calipers, and rotors. The wheel and axle were the same. then i broke a fork, and scooped up a 03-04 636 front end for nothing
i continued to use the 07 r6r triples, and just slid the 636 forks in with the kawi wheel, rotors, calipers etc. 05 triples are nice because they're beveled to run clip ons on top as opposed to the 07 where you have to run clip ons underneath. THE RAKE OF THE 05 AND 07 TRIPLES ARE DIFFERENT. i tried running an 07 lower and 05 upper, and the wheel was practically on the radiator. as for your issue, using 636 triples, i think you can call or look up the conversion bearings on ALL BALLS website, if you want use those. i think superdave was running 05-06 triples back in the day. but yea...good luck, hope this was helpful