+- Stuntride (https://stuntride.the-nags.com)
+-- Forum: Stunt Discussion (https://stuntride.the-nags.com/forumdisplay.php?fid=4)
+--- Forum: Help and How To (https://stuntride.the-nags.com/forumdisplay.php?fid=12)
+--- Thread: 03-04 636 Neutral Safety Switch Mod (/showthread.php?tid=19481)
Pages:
1
2
03-04 636 Neutral Safety Switch Mod - *Joker* - 10-17-2010
With all the talk of 636 tranny's blowing up because of high idle drops from neutral to first gear, I wanted to override my neutral safety switch so I could start my bike in gear. Because I unhooked my blinker pod I couldn't do it at the bars like I did on my F4i. It had to be jumped on the main harness where the pod plugs in. Overall this is really easy to do and rather than explain it in detail, below is a picture; just jump the top left plug to the middle plug and wrap it in electrical tape. Should take you longer to find some wire and electrical tape than to do the actual mod...
03-04 636 Neutral Safety Switch Mod - babyJOKER - 10-18-2010
Shit is too hard...u should do it for me tomo at the lot.
03-04 636 Neutral Safety Switch Mod - Duane S. - 10-18-2010
or use a staple and some tape this mod does wonders homie
03-04 636 Neutral Safety Switch Mod - Ethiopian - 10-18-2010
theres a much easier way, theres a sensor under the front sprocket cover, ground that out to a bolt on the stator cover, shamwow. same thing for a f4i.
03-04 636 Neutral Safety Switch Mod - Ethiopian - 10-18-2010
f4i one but same concept, see that sensor circled in red, ground the wire that goes to that out.
03-04 636 Neutral Safety Switch Mod - mdub4life29 - 10-21-2010
^^^ love this guy... cracks me up with his sayings. "check this out you'll love my nuts!" slapshot
03-04 636 Neutral Safety Switch Mod - Ethiopian - 10-21-2010
Quote:
|
Originally Posted by mdub4life29
 ^^^ love this guy... cracks me up with his sayings. "check this out you'll love my nuts!" slapshot
|
03-04 636 Neutral Safety Switch Mod - mdub4life29 - 10-21-2010
I know. U Were quoting shim wow. I quoted the same Guy with the slap shot. Nvm
03-04 636 Neutral Safety Switch Mod - Ethiopian - 10-21-2010
I get it now lol.
03-04 636 Neutral Safety Switch Mod - Tig - 11-12-2010
Quote:
|
Originally Posted by Ethiopian
theres a much easier way, theres a sensor under the front sprocket cover, ground that out to a bolt on the stator cover, shamwow. same thing for a f4i.
|
