+- Stuntride (https://stuntride.the-nags.com)
+-- Forum: Stunt Discussion (https://stuntride.the-nags.com/forumdisplay.php?fid=4)
+--- Forum: Help and How To (https://stuntride.the-nags.com/forumdisplay.php?fid=12)
+--- Thread: denting tank (/showthread.php?tid=10519)
denting tank - *Ghost* - 08-13-2026
\r\n \r\n wat bike?\r\n
denting tank - SDFKILLZ - 08-13-2026
\r\n \r\n deadblow hammer is what you need, rubber mallets bounce. start at the back of the cap and work your way out.\r\n
denting tank - RUTHLESS RAH - 08-13-2026
\r\n \r\n
\r\n \r\n
\r\n
i have a f3 that i need to dent and my f4i is dented alreadi but i mite need a new tank so ima have to dent that too\r\n
Quote:
\r\n | \r\n \r\n \r\n Originally Posted by *Ghost*\r\n \r\n  \r\n wat bike? \r\n \r\n | \r\n
denting tank - RUTHLESS RAH - 08-13-2026
\r\n \r\n
\r\n \r\n
\r\n
and dent tha actual cap in last???\r\n
Quote:
\r\n | \r\n \r\n \r\n Originally Posted by SDFKILLZ\r\n \r\n \r\n deadblow hammer is what you need, rubber mallets bounce. start at the back of the cap and work your way out. \r\n \r\n | \r\n
denting tank - buddy lenzin - 08-13-2026
\r\n \r\n - Keep the gas cap secure on the tank. Do not take it off and try to dent it.
\n- IF you are denting it deep cut out the splash gaurd before you dent or it will take 5 minutes to fill your tank.. lol..\r\n
denting tank - JOHNNYSTUNTS - 08-13-2026
\r\n \r\n iv done quite a few tanks and i use the rubber round malllet...and you start on either side and work your way over... or you can start in the middle and work out..
\n
\nthis is like a no brainer, but dont start on one side then start another.. lol
\n
\ni always dent the "O" town style.. not the whole top
\n
\ni hope that make sense\r\n
denting tank - RUTHLESS RAH - 08-13-2026
\r\n \r\n
\r\n \r\n
\r\n
o aite thanx\r\n
Quote:
\r\n | \r\n \r\n \r\n Originally Posted by buddy lenzin\r\n \r\n \r\n - Keep the gas cap secure on the tank. Do not take it off and try to dent it. \r\n \r\n \n- IF you are denting it deep cut out the splash gaurd before you dent or it will take 5 minutes to fill your tank.. lol.. | \r\n
denting tank - RUTHLESS RAH - 08-13-2026
\r\n \r\n if anyone can get sum pix up of their tanks i wud appreciate it\r\n
denting tank - RUTHLESS RAH - 08-13-2026
\r\n \r\n
\r\n \r\n
\r\n
thanx, i\'ll try 2mrw\r\n
Quote:
\r\n | \r\n \r\n \r\n Originally Posted by JOHNNYSTUNTS\r\n \r\n \r\n iv done quite a few tanks and i use the rubber round malllet...and you start on either side and work your way over... or you can start in the middle and work out.. \r\n \r\n \n \nthis is like a no brainer, but dont start on one side then start another.. lol \n \ni always dent the "O" town style.. not the whole top \n \ni hope that make sense | \r\n
denting tank - Juca - 08-13-2026
\r\n \r\n erg\r\n