My Righteous Clutch Review - Printable Version

My Righteous Clutch Review - Printable Version

+- Stuntride (https://stuntride.the-nags.com)
+-- Forum: Stunt Discussion (https://stuntride.the-nags.com/forumdisplay.php?fid=4)
+--- Forum: Stunt Discussion (https://stuntride.the-nags.com/forumdisplay.php?fid=9)
+--- Thread: My Righteous Clutch Review (/showthread.php?tid=7347)

Pages: 1 2 3 4

My Righteous Clutch Review - old man roger - 09-24-2009

Originally Posted by hollywoodstuntz

Did you try mounting it this way?

i was gonna say the same thing , i like my brake all the way inside so i get the most leverage

My Righteous Clutch Review - nags - 09-24-2009

They do look good, and I plan on trying one out once he offers the longer lever

My Righteous Clutch Review - sickrick1 - 09-24-2009

Right on good to know

My Righteous Clutch Review - john LegionST - 09-24-2009

Originally Posted by old man roger

i was gonna say the same thing , i like my brake all the way inside so i get the most leverage

Same here OMR, i dont know why people run the HB on the outside?!?!? putting it on the inside give you lots of room for any clutch lever and max leverage on the HB itself... only way to go!

My Righteous Clutch Review - J Blox - 09-24-2009

I don't know why people just don't buy clutch side masters. LOL

My Righteous Clutch Review - bulletchicken - 09-24-2009

Same problem over here as Kyle.

I wasnt able to pull my clutch around my handbrake from the inside.

I had to mount my clutch on the outside of the brake and then the clutch lever sits really close to the bar.

I can make mine work, just needs some getting used to.

Thanks Righteous!

My Righteous Clutch Review - Righteous 1 - 09-24-2009

Here is the PM just sent out to all that had paid for and got shipped a lever. My foot injury kept me from being able to mount up and test a final run perch.... :-( ...Also....I was too excited to get these out there. My one off prototype perch that I tested had a lever angle VERY similiar to and MSR, and was much more comfortable and adjustable. Somewhere along the programing transition between my prototype and the final product, my machinist changed the angle. He has promised me a new set of perches by Tuesday to send out to replace the incorrect ones. I feel like shit about this whole thing.

Respect to Kyle......he informed me of something being screwy. So this morning I had my wife help me mount up a final run perch and lever in place of my prototype.....sure enough....lever angle was way off. Thanks for bringing it to my attention, Kyle.

At the moment, the lever angle is going to be the only thing changed on the perch. Thanks for your other suggestions though, Kyle.

PM I sent out......

I really appologize guys......I didn't get to test the finished product before I sent out the orders due to my crushed foot. Incidentally, the perches sent out with your order are not machined in accordance with my prototype, and the angle of the lever is inward as such that the lever is too close to the bar, with no room for adjustment or personalization. I talked to the machinist this morning, and he promised me new perches with the correct angle, very similiar to an MSR on Tuesday. So....once again, I appologize. Do not try to mount your unit until you get this new perch in the mail, unless you want to be dissappointed.... :-( .....I wish my foot hadn't gotten so fucked up, and I woulda tested the final thing before I shipped.
If you can send back the perch you have, we can machine it to the correct specifications for a future order and not loose out on those pieces of work. I will paypal you $15 upon receiving your perch. I hope you all understand.
Sorry.....and thanks for your patience. -Josh

My Righteous Clutch Review - Stick - 09-24-2009

Good to hear that he was so good about working with you on the return and hopefully things like this will help him refine it til it's perfect for everyone's setup

My Righteous Clutch Review - krazykyle85 - 09-24-2009

Originally Posted by john LegionST

Agreed, and I really cant say much cause you obviously murder Clutch/HB with your current setup... but just from my many years of experience, everyone who i convinced to try mounting the HB as far in on the clipon as possible has loved it and said it helped them with a lot of tricks and control.

I think ur right thou about it needing to fit everyone's setup and was glad to see that you and Righteous could work together on this, in the end it will only help everyone!

i know exactly what your sayn...
believe me ive tried alot of diffrent positons

but i personally like my handbrake low and have the center of the lever centered on my finger... and when i need more or less brake i move my finger

but its all what works.

everyone runs diffrent shietttttttttttttttttt

My Righteous Clutch Review - krazykyle85 - 09-24-2009

Originally Posted by john LegionST

Same here OMR, i dont know why people run the HB on the outside?!?!? putting it on the inside give you lots of room for any clutch lever and max leverage on the HB itself... ONLY WAY TO GO!

I know I am not too good with clutch/handbrake...

But I like my way.. It's my only way to go.. Lol

just like guru kills it with hb on top!

But the msr works with all those styles..
The righteous stunt clutch should be modified so it can do the same!

.. That's my