05-03-2010, 06:42 PM
I've been triding this bike for over a year now and it's ran just fine. I run my idle at 4500RPM's for stunting and as soon as I dig into a little bit of brake the bike bogs at 2000RPM and starts to sputter. Otherwise the bike runs fine under power, it only seems to do this at 2000....
It only does this when it's hot, It seems to start at 212 degrees. Otherwise the motor seems to pull fine before it gets that hot. We drained the coolant thinking head gasket, but the engine ice was fine, no oil.
We've tested compression, leak down, coils, valve clearance, throttle body sync, new plugs, bypassed the powe commander, and numerous other things im forgetting and we can't figure it out. The problem continues...
Anyone have any ideas????
It only does this when it's hot, It seems to start at 212 degrees. Otherwise the motor seems to pull fine before it gets that hot. We drained the coolant thinking head gasket, but the engine ice was fine, no oil.
We've tested compression, leak down, coils, valve clearance, throttle body sync, new plugs, bypassed the powe commander, and numerous other things im forgetting and we can't figure it out. The problem continues...
Anyone have any ideas????


