Wr250f problems
#1
My buddy was riding my supermoto doing a long wheelie and the bike started ticking and he said it started losing power and shut the bike off. The bike wouldn't start after that. I been mess in with the bike for awhile now and when i drain my oil i have lots of gas coming out. Before all this i had checked timing,made sure there was spark but still no luck with the bike starting. I took the bowl off and the needle doesn't get get stuck any moves just fine. Anyone ever had this problem?
Reply
#2
I'll give u $500 for it.....
Reply
#3

Quote Originally Posted by Chadf
View Post
I'll give u $500 for it.....

Negative. Haha
Reply
#4
U sure its gas and not coolant?
Reply
#5
Gas coming out of where?



EDIT: Make sure you're putting in enough oil. I know the WR's take more then the YZ's.. easy to confuse volume. What year is it? I think the new WR's have an oil sensor. Could be why it shut down in the first place.
Reply
#6

Quote Originally Posted by BirDMaN420
View Post
U sure its gas and not coolant?

Yeah it gas for sure,i still have same amount of coolant in my radiator


Quote Originally Posted by StrictlyStunt
View Post
Gas coming out of where?



EDIT: Make sure you're putting in enough oil. I know the WR's take more then the YZ's.. easy to confuse volume. What year is it? I think the new WR's have an oil sensor. Could be why it shut down in the first place.

Its a 08,i filled up the engine with the right amount of oil. The bike didn't shut off,he said it was bogging and loosing power so he pulled over and cut the bike off.
Reply
#7
where was gas comming out of ?
Reply
#8

Quote Originally Posted by lucky13
View Post
where was gas comming out of ?

The gas was coming out of engine when i drained the oil
Reply
#9

Quote Originally Posted by Cory_4fiddy
View Post
The gas was coming out of engine when i drained the oil

You don't know where, specifically?
Reply
#10
I believe he means it was mixed in with the oil
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)