Posts: 101
Threads: 3
Joined: Nov 2008
Reputation:
0
Clutched up a street wheelie 2nd gear rode it about 2 blocks to my road set it down bike shuts off! Turned key switch off right after then immediately back on fuel pump didnt prime and for us 03-04 636 guys we def hear our pumps when it comes on cause its loud. So short story new fuel pump,gas tank,wiring harness still no fuel pump priming noice. Checked fuses all good, im lost guys...
Posts: 1,061
Threads: 45
Joined: Dec 2010
Reputation:
0
you bypass or remove the pendulum from the tip sensor??? hmm re-read your post... im confused too doesnt sound like tip
Posts: 42
Threads: 4
Joined: Sep 2012
Reputation:
0
i know im a squid in the stunt world but i had the same issue and did nearly the same maint on my gsxr600. turned out to be the new fuel pump wire plug had a bad connecting pin in it.
Posts: 226
Threads: 17
Joined: Jan 2011
Reputation:
0
if you try to start it does it turn over but not start? if so then squints has got it right, get that pendulum out of the tip sensor since it most likely fell out of place
Posts: 382
Threads: 22
Joined: May 2010
Reputation:
0
Check ur kill switch. I had actually break internally last year. Dunno how but it did. New switch and bam if not that then bypass tip switch. U can jump it with some wire connecting the outside 2 wires together
Posts: 151
Threads: 11
Joined: Sep 2011
Reputation:
0
Wouldn't turn over if killswitch was engaged. Fuel pump Plug/wiring is most likely the cause
Posts: 101
Threads: 3
Joined: Nov 2008
Reputation:
0
Ive awitched fuel pump already and wiring harness. Switched out to another starter switch also still no start! Bike just turns over but no fuel to ignite.
Posts: 90
Threads: 5
Joined: Nov 2009
Reputation:
0
Bad computer ? Got some one who will let you try theirs ?
