what's the best handbrake setup lol

[kevin09]

Originally Posted by OnEWhEeLNEAL

any bracket that accepts radial calipers will work with the r6 calipers if you want. I don't know how much pads are but they're probably more expensive than the 600rr/1000rr calipers i been rocking. $30 a pair for pads

+1 but you will have to mod either the caliper or the bracket since the spacing is different for the pads to sit with the rotor....for ex: on the 05 636 obviously you can use the stock rotors and calipers, but if you swap a set of r6 monoblocks on you need 310mm rotors (+10mm more) i would assume the same here so that can either make for a bigger big rotor kit or shaving down on caliper/bracket...

[OnEWhEeLNEAL]

Originally Posted by kevin09

+1 but you will have to mod either the caliper or the bracket since the spacing is different for the pads to sit with the rotor....for ex: on the 05 636 obviously you can use the stock rotors and calipers, but if you swap a set of r6 monoblocks on you need 310mm rotors (+10mm more) i would assume the same here so that can either make for a bigger big rotor kit or shaving down on caliper/bracket...

the fti kit comes w spacers for different calipers but yeah you right

[kevin09]

Originally Posted by OnEWhEeLNEAL

the fti kit comes w spacers for different calipers but yeah you right

oh for real?! i didnt know that i thought it was just already pre made for certain calipers like all the other brackets out there, thats good info to know

[always.anthony]

Originally Posted by OnEWhEeLNEAL

the fti kit comes w spacers for different calipers but yeah you right

would the fti bracket accommodate the 310mm rotor and r6 monoblock with no trimming, or extra spacers other than the ones provided?

[808BMW]

FTI RADIAL (always see these confused with a dual quad) bracket is made for a busa rotor, not too sure on the size for that (definitely not 310mm though, something like 220-240mm?). The spacers are decently sized, so I'm pretty sure a caliper with more spacing (r6 monoblock) would just require a smaller spacer.

I like motodoc's setup, but you have to mod your own rotor to make it fit, and I don't own a motodoc bracket so I don't have any experience on it. FTI is just bolt on, but Bill@FTI is kind of busy nowadays so I'm not too sure on availability.

[Moto-Madness.com]

FTI all the way. Bill just got his machines back up and running and we have a big shipment of the brackets coming in next week hopefully.

[Shane K]

Originally Posted by Moto-Madness.com

FTI all the way. Bill just got his machines back up and running and we have a big shipment of the brackets coming in next week hopefully.

Do i hear a celebration sale or group sale comin?

[Moto-Madness.com]

Haha see what I have after all the back orders are filled but since he's back up and runing 100% hopefully we usually get shipments every other week or so of them.

[Shane K]

well thats a start...sounds good...just put my new front end on last night so i'm hurtin for dough, but if a group sale hits i'll be down like 4 flat tires on a cadillac

[itzmatty]

whats FTI making, please let me know as im about to buy a new HB setup and dont want make the wrong choice.