03-04-2011, 11:05 PM
You should check out the info that airbrushjohn posted about adjusting the idle on these it's a pain in the ass on the 08 and above. Lots of other good info in that thread too about how to get more low end torque out of it. If you can't find the thread using the advanced search I can dig it up for you.
Good luck with your build and post lots of pics, everbody likes a good bike build. Oh yeah, you don't need an oil pick up. Just run the oil to the top of the sight glass. Don't forget to do the clean air mod too before you get it up on one. I've been playing around with my neutral safetly switch too because if you just bridge it you lose power on these. I wired mine to a toggle to trick the ecu.
Good luck with your build and post lots of pics, everbody likes a good bike build. Oh yeah, you don't need an oil pick up. Just run the oil to the top of the sight glass. Don't forget to do the clean air mod too before you get it up on one. I've been playing around with my neutral safetly switch too because if you just bridge it you lose power on these. I wired mine to a toggle to trick the ecu.