636 swingarm conversion

[Matt_M]

Quote:

Originally Posted by old man roger the cush drive spacers are the same on both bikes they are thick solid spacers with no lip the brake side spacers are different they are smaller than the brake side and have a lip , if you use one thats too small it will allow the swing arm to flex in too much when you tighten the axle and it should be clear it's the wrong one , the right one should fit snug and not really allow the swing arm to flex in when you tighten the axle

i had both sets of them sitting next to each other. the cush drive ones are not the same nor are the other side. the cush drive spacers are a good 1/4 inch different. once i cleaned them up i noticed that they were distinctly 2 different colors, so i looked at johnnyp's original write up and he stated that the 05 06 are titanium colored where the 03 04 are more a bright silver. i threw in the titanium colored set and all seems to be well. thanks for the help though.

the 03 04 part #92152-1254, the 05 06 is 92152-0244. my ol lady works at a kawi dealer and said if they are not the same part number they are different in some way. so in fact the cush drive spacers are different just for everyones knowledge.