03-26-2010, 02:09 AM
Quote:
|
Originally Posted by INSANECRAZZY
 OK..... this pic below shows how it is stock (its just there so you know whitch one it is)
 no this pic below is how it should look when its done. 1- cap off the port in the air box it came out of. 2- run a longer hose from the egine crank case breather to the T. like shown below. its a straight peice directly from the crank case to the T only.  hopefully the rest is self explanatory. let me know if you have any other questions. dont forget to cap off hole #1/#2 and cap off hole #4 in air box, and hook the rest of the tubes back up to it. let me know if helps, and if you have any other questions.  |
Dude you rock... thats whta i thought but wasn't sure... thanks for the help....