03-26-2010, 02:06 AM
Quote:
|
Originally Posted by Tough Luck
 Please tell me there is someone on here right now that can explain this to me. I'm doing this to my bike right now but im confused about what to do with hose #4 in one picture the hose is run from the crank case up to the "T" where #1 & #2 are connected then in the other picture the hose goes directly from the crank case to the hole on the back of the air box just like stock???????? what is the right way???????? HELP AM I JUST DUNB AND DON'T SEE IT????????????????
|
no this pic below is how it should look when its done.
1- cap off the port in the air box it came out of.
2- run a longer hose from the egine crank case breather to the T. like shown below. its a straight peice directly from the crank case to the T only.
hopefully the rest is self explanatory. let me know if you have any other questions. dont forget to cap off hole #1/#2 and cap off hole #4 in air box, and hook the rest of the tubes back up to it.
let me know if helps, and if you have any other questions.
