02-01-2010, 07:48 PM
fyi-you have to swap the linkages from the mustang to the explorer TB.
to trick the ecu about the missing egr you can run a hose clamp (or anything) that will hold the pin that sticks out of the sensor in. if you disconnect the 3 9mm bolts that hold the sensor to the housing you'll see what I mean
to trick the ecu about the missing egr you can run a hose clamp (or anything) that will hold the pin that sticks out of the sensor in. if you disconnect the 3 9mm bolts that hold the sensor to the housing you'll see what I mean