Less than 1 minute ago
\r\n \r\n
\n
\nThat rim has no brake panel . you will need the right type hub panel on the right side for it to work .
\n
\nA regular stock crf50 brake panel fits into the hub on a stock wheel , but it also slides in the notch on the swingarm .
\n
\nAnd the caliper will need to be mounted to a bracket . And the bracket will have to work on a stock crf50 swingarm .
\n
\nMost chinese knockoffs with rear discs , also have different swingarms . That is what that rim assembly is designed for .
\n
\nAnd i\'m guessing that fluid resivoir on the lever would fall off or crack when you drop the bike and the bars hit the ground .\r\n
\r\n \r\n
\r\n
The rear caliper link does not work . You need to post the full link .Quote:
\r\n | \r\n \r\n \r\n Originally Posted by Razors_Diesel\r\n \r\n  \r\n heres the set up i was lookin at.......... \r\n \r\n \n \nrim setup \nhttp://cgi.ebay.com/ebaymotors/BLUE-...=p4506.c0.m245 \n \n \nrear caliper \n \nhttp://cgi.ebay.com/ebaymotors/REAR-...=p4506.c0.m245 \n \nradial master (id have to flip the cup over to make it the left side) \n \nhttp://cgi.ebay.com/ebaymotors/16x18...=p4506.c0.m245 \n \nWhat size line did u use? | \r\n
\n
\nThat rim has no brake panel . you will need the right type hub panel on the right side for it to work .
\n
\nA regular stock crf50 brake panel fits into the hub on a stock wheel , but it also slides in the notch on the swingarm .
\n
\nAnd the caliper will need to be mounted to a bracket . And the bracket will have to work on a stock crf50 swingarm .
\n
\nMost chinese knockoffs with rear discs , also have different swingarms . That is what that rim assembly is designed for .
\n
\nAnd i\'m guessing that fluid resivoir on the lever would fall off or crack when you drop the bike and the bars hit the ground .\r\n