04-09-2013, 04:26 PM
Nothing will hold the headlight inplace without wobbles other than a beefed up stay with extra mount points for the headlight housing. The two rubber grommet things on the back of the stay there are two little plastic spike looking things that come off the houseing that slide in there. Headlight is only attached by those two things holding them in place, and the like 5 screws that attach it to the upper. Then the upper fairing is only attach by the 3 bolts on each side of the sides, the pop fasteners that are on the inner fairing piece if you even have that and the bolts on the intake dust covers. Oh and the top windscreen bolts and mirrors if you don't have the upper trimmed down. I just took my headlight hout and run it empty. otherise you are probably going to break it. Stealthstay is probably the only way to get around that and I'm not even positive on that.