636 Kleen Air Mod with Power Commander

[old man roger]

Quote:

Originally Posted by tayto94 Yep i get yas. was just wondering would the vapour of the oil cause some expanding gas and it not have anywhere to go. cheers bike idles fine when the problem was happening, would happen alot with the likes of coming into a drift or coming out of one. will get proper run this evening and see how it goes cheers

like mentioned before, the air valve is ported to the exhaust so the ''expanding gas'' does have some where to go.

Quote:

Originally Posted by tayto94 Checked over everything and the mod was done correctly. all parts of airbox plugged. done a smoke test and there was no air being sucked in from around the airbox. Took it out again and still would bog every so often. Changed the air intake back to stock (no kleen air mod) and took it out all day yesterday to see if that eliminated the problem. Still bogged two or three times. not as bad as before but still. Im now thinking that maybe one of my coils is on the way out. It feels like its dropping a cylinder for a couple of seconds then it comes back in

Remember that having the clean air mod done is very important on the 636 if you are going to be stunting it. It will save you from blowing a rod out the front of your motor.