F4i Clutch Arm Mod ... Must Have

[PHOZE]

Originally Posted by Adroit707

Old thread bump but holy shit this was a fucking pain in the ass do to.

F4i
Took the clutch cover off, drilled my holes got everything ready to go.

Fuck. Damn it, piece of shit, fuck you!!! frames in the way of both the cable bolt and the middle one..

Tightened the 3rd bolt up then swung it in. Then spent about an hour or so just trying to get the other 2 bolts in a space about an inch high. Note to future people doing this. Get actual bolts! Allens fucking suck to work with cuz you have no space to tighten them up. With bolts you and put a little wrench in. As for running a nut behind the allen screw I have absolutely no room to do so I have no clue how this could take 10 min. Took me like 3 fuckin hours to do. 2 of which were spent cursing at the bike as I was tryin to jam the arm in past the frame and tighten the bolts

rant over..

Lol damn that sucks man. Why didn't you weld it instead? Mike M extended and welded mine. All I had to do was bend it down just a bit so it would clear the frame and then bend it straight once it did. Def a must have mod.

Originally Posted by Nappy

Took me 5 minutes. Was the best mod I ever did on the f4i... But I did it mid rebuild when the engine wasn't in the frame. But if you're gonna change your oil, why not just take an extra 20 minutes and do this mod? Taking the clutch cover off and reinstalling is a walk in the park.

+1

I didnt even take the oil out. I just layed it on the left side. Let it sit for 10-15 minutes then just did it.