Less than 1 minute ago
\r\n \r\n
\r\n \r\n
\r\n
You should check the specs and wiring on the subs. You can\'t just test the resistance across the terminals. Impedance is not the same as resistance. You need to know the impedance to make sure you have the right setup.\r\n
Quote:
\r\n | \r\n \r\n \r\n Originally Posted by Raf\r\n \r\n  \r\n So I have 2 12" kicker cvr subs in the boat and they were wired to a JL 500/1 amp. My amp fried and I now have a lightning audio strike s4.1000.1d amp. Will this amp fry my subs? The specs on the amp say: \r\n \r\n \n \n250 watts x 1 @ 4 ohms \n500 watts x 1 @ 2 ohms \n1000 watts x 1 @ 1 ohm \n \nI\'m not entirely sure how the subs are wired together but I took an ohms reading at the 2 wires that go to the amp and got just a little under 4 ohms. \n \n \nhere are the links to what I have: \n \nhttp://www.lightningaudio.com/produc...3&locale=en_US \n \nhttp://www.google.com/products/catal...ed=0CHAQ8wIwAg | \r\n