+- Stuntride (https://stuntride.the-nags.com)
+-- Forum: Stunt Discussion (https://stuntride.the-nags.com/forumdisplay.php?fid=4)
+--- Forum: Projects and Builds (https://stuntride.the-nags.com/forumdisplay.php?fid=104)
+--- Thread: First F4i build (/showthread.php?tid=52378)
Pages:
1
2
First F4i build - ShakAttack - 02-15-2014
Well I picked up an f4i this week and the tear down began after about 3 seconds of having her off the truck. I have a list of To Do's and a deadline that hopefully has good enough weather to rip her around.
The list
-Fabrication buddy making
-Flat top tank with lip
-Tail saver
-Seat hole foot plate
-Sync TB/clean air mod
-RSC Clutch (Ordered)
-Sick Innovations (All Ordered)
-Cage
-12 bar
-Subcage
-60 tooth rear sprocket/16 tooth front
-520 Red Chain (Ordered)
-Convertibars Black (I won a set at a raffle a few years back but didn't have a bike they fit. Upon picking up the f4i I gave Steve the owner a call to see if I could still redeem the certificate even though a few years had passed. To my surprise he was a SUPER nice guy and had no problem getting them sent out right away!
)-Set of f4i front calipers from a buddies crashed up bumblebee
Still need to order
-FT Dual 4 piston bracket
-Brembo 16x18
-80" line
-Cyclops Headlight
Picked a 2002 and got it home for a few laps around my underground parking garage, and then the tear down began.
Got her all tucked away for the night with the other toys
Got a little bathtub bondo action going on. These plastics weren't the greatest so they will see some ghetto rigging and a rattle can paint job till I get a better set.
Seat hole came out clean, I just have to borrow someones sowing maching to get it wrapped. So for now a ducttape job will work for mock up
First F4i build - (Brandon) - 02-16-2014
Duct tape does all!
First F4i build - Hitman 700 - 02-17-2014
I agree with Brandon. Duct tapes the new powder coating.. lol!!
First F4i build - (Brandon) - 02-17-2014
Originally Posted by Hitman 700
First F4i build - (Brandon) - 02-17-2014
Bike is owned by a friend by the name of scott. He just rebuilt it late fall, he crashed real bad last year and broke a leg and a few other things I think. Check out the duct tape paint job though!
https://scontent-b-ord.xx.fbcdn.net/...25790918_n.jpg
First F4i build - Hitman 700 - 02-18-2014
my duct tape job.. rattle canned the rims and tank
Sent from my iPhone using Tapatalk
First F4i build - ShakAttack - 02-19-2014
Well I did some work this week end
Got the exhaust shortened up
Wasnt to hard, I just had some issues getting the cap to find its way on. Nothing a big ol' hammer couldnt handle.
Shortened my nose fairing and windscreen. Still not sure if i will go full fairing or not, so I did it anyway.
Painted the windscreen
And then I got to painting the rotors
And a few parts made their way to my house
First F4i build - (Brandon) - 02-19-2014
I love short cans. My yoshi RS3 is probably 8 inches long. With soft exhaust packing and a short can it sounds pretty raw.
First F4i build - ShakAttack - 02-19-2014
I kept the original packing in there, right wrong or indifferent it'll work. Just ordered up all new fairing bolts as the bike had ALLLLL, and I mean ALLL KINDS of different bolts mounting all of the fairings. Flat head, Philips, torx, some missing...lots missing lol. I also ordered new bolts for the radiator mount. The radiator is just being held on by the hanger and the bottom mount. I don't know how it has even stayed on this long. But she will be all secure and sturdy once I'm done.
First F4i build - (Brandon) - 02-21-2014
Originally Posted by GhostMercury