+- Stuntride (https://stuntride.the-nags.com)
+-- Forum: Classifieds (https://stuntride.the-nags.com/forumdisplay.php?fid=6)
+--- Forum: For Sale - Parts/Accessories (https://stuntride.the-nags.com/forumdisplay.php?fid=15)
+--- Thread: 50mm Aftermarket Clip Ons (/showthread.php?tid=44061)
50mm Aftermarket Clip Ons - Tiger - 08-13-2026
\r\n \r\n bump for a good guy...\r\n
50mm Aftermarket Clip Ons - garcia2389 - 08-13-2026
\r\n \r\n 06 636 forks are 50mm right?
\n
\nliterally just bent my stock clip on and was considering either aftermarket clipons or running DB bars on my stock triple somehow\r\n
50mm Aftermarket Clip Ons - garcia2389 - 08-13-2026
\r\n \r\n oh, these would need to be mounted on top of the triple tree to get the height as stock flipped clip ons on top of the triple don\'t they?\r\n
50mm Aftermarket Clip Ons - ONEwheelPHIL - 08-13-2026
\r\n \r\n You can mount them above or below the triple, most people drop the front and run them on top.\r\n
50mm Aftermarket Clip Ons - garcia2389 - 08-13-2026
\r\n \r\n
\r\n \r\n
\r\n
yea I have my stock ones up there now, but I figured if I was going to spend some money on some aftermarket ones I\'d like the front end NOT to be lowered like it is now\r\n
Quote:
\r\n | \r\n \r\n \r\n Originally Posted by ONEwheelPHIL\r\n \r\n  \r\n You can mount them above or below the triple, most people drop the front and run them on top. \r\n \r\n | \r\n
50mm Aftermarket Clip Ons - ONEwheelPHIL - 10-07-2012
Graves 50mm clip ons, 7 degree sweep. Clamps are straight no bends, one hollow bar is bent, 2 steel screws are broke on the back side of one clamp. $70obo, shoot me a pm if you need to contact me.
50mm Driven clip ons, 7 degree sweep. Clamps are straight no bends, one hollow bar is bent. $80obo, shoot me a pm if you need to contact me.
