+- Stuntride (https://stuntride.the-nags.com)
+-- Forum: Stunt Discussion (https://stuntride.the-nags.com/forumdisplay.php?fid=4)
+--- Forum: Videos and Reviews (https://stuntride.the-nags.com/forumdisplay.php?fid=10)
+--- Thread: R6 Tank dent at the lot (/showthread.php?tid=38676)
Pages:
1
2
R6 Tank dent at the lot - M.F. Mall Cop - 08-13-2026
\r\n \r\n \r\n
R6 Tank dent at the lot - vollrath - 08-13-2026
\r\n \r\n It takes about an hour less time if you use a heavier hammer lol. I liked your two handed technique though
\r\n
R6 Tank dent at the lot - Fishbone - 08-13-2026
\r\n \r\n hahahhha looks good !\r\n
R6 Tank dent at the lot - !!A2K!! - 08-13-2026
\r\n \r\n Id say thats gona leak and not breathe. Did it get stuck on the airbox? Lol\r\n
R6 Tank dent at the lot - Baker505 - 08-13-2026
\r\n \r\n Thanks guy. No leaks. We pounded a dent out that was gonna make it crease all sick and after that it was nice an smooth. The tumbler in the lock broke and halfway through opened. The gas hole has a cage around it so it won\'t go all the way down like a 636 would.
\r\n
\r\nAnd a special thanks to EDuB for the dent. I\'ll post a pic of the finished product after a little Bondo to smooth it all out.\r\n
R6 Tank dent at the lot - Kilo_Gee - 08-13-2026
\r\n \r\n Looks good!
\n
\nEDub=Tank Dent Yoda?\r\n
R6 Tank dent at the lot - !!stretch!! - 08-13-2026
\r\n \r\n
\r\n \r\n
\r\n
\ni would say you have obviously never dented an r6 tank*Quote:
\r\n | \r\n \r\n \r\n Originally Posted by vollrath\r\n \r\n  \r\n It takes about an hour less time if you use a heavier hammer lol. I liked your two handed technique though \r\n \r\n | \r\n
\nits a nightmare, ask almost anyone that has.\r\n
R6 Tank dent at the lot - Nateural - 08-13-2026
\r\n \r\n i had to melt the top of my airbox for my tank to fit lmao\r\n
R6 Tank dent at the lot - Baker505 - 08-13-2026
\r\n \r\n
\r\n \r\n
\r\n
Yes. No better way to put it. Haha Quote:
\r\n | \r\n \r\n \r\n Originally Posted by Kilo_Gee\r\n \r\n \r\n Looks good! \r\n \r\n \r\n \r\nEDub=Tank Dent Yoda? | \r\n
\r\n
\r\n
\r\n \r\n
\r\n
Lol. Didn\'t have any issues with this one sounds like a bitch though.\r\n
Quote:
\r\n | \r\n \r\n \r\n Originally Posted by ARslinger\r\n \r\n \r\n i had to melt the top of my airbox for my tank to fit lmao \r\n \r\n | \r\n
R6 Tank dent at the lot - EDUB - 08-13-2026
\r\n \r\n
\r\n \r\n
\r\n
Thats a dead blow hammer filled with sand so there really isnt a heavier hammer. That thing has like 40 tank dents on the same hammer and believe me there is no better hammer for the job. My first R6 tank and wait until you see it all cleaned up. Came out pretty good. One of the best R6 dents without metal fab in my opinion.\r\n
Quote:
\r\n | \r\n \r\n \r\n Originally Posted by vollrath\r\n \r\n \r\n It takes about an hour less time if you use a heavier hammer lol. I liked your two handed technique though \r\n \r\n | \r\n