+- Stuntride (https://stuntride.the-nags.com)
+-- Forum: Stunt Discussion (https://stuntride.the-nags.com/forumdisplay.php?fid=4)
+--- Forum: Help and How To (https://stuntride.the-nags.com/forumdisplay.php?fid=12)
+--- Thread: Zx11 rotor (/showthread.php?tid=33523)
Zx11 rotor - DerekS - 08-13-2026
\r\n \r\n I\'ve never had a real issue. I just rode it how it was. Wears down a little bit, but not to much.\r\n
Zx11 rotor - GAMstunts - 08-13-2026
\r\n \r\n HHD did mine, I assume any machine shop could do it.\r\n
Zx11 rotor - MikeM - 08-13-2026
\r\n \r\n
\r\n \r\n
\r\n
I have a non-hohey bracket. I had to grind 1mm off the heads of my bracket bolts for clearance. I used the side of the wheel on my bench grinder.\r\n
Quote:
\r\n | \r\n \r\n \r\n Originally Posted by PowdaB\r\n \r\n  \r\n Squid question but how are you guys countersinking the rotor bolts so they don\'t hit the bracket? Thanks \r\n \r\n  | \r\n
Zx11 rotor - PowdaB - 08-13-2026
\r\n \r\n Has anyone tired to use the oem zx11 bolts?\r\n
Zx11 rotor - SQUINTS - 08-13-2026
\r\n \r\n MVSbrendon may be able to help you....\r\n
Zx11 rotor - PowdaB - 11-06-2011
Squid question but how are you guys countersinking the rotor bolts so they don't hit the bracket? Thanks