+- Stuntride (https://stuntride.the-nags.com)
+-- Forum: Stunt Discussion (https://stuntride.the-nags.com/forumdisplay.php?fid=4)
+--- Forum: Projects and Builds (https://stuntride.the-nags.com/forumdisplay.php?fid=104)
+--- Thread: 03/04 zx6 build with 05/06/07/08 parts (/showthread.php?tid=31799)
Pages:
1
2
03/04 zx6 build with 05/06/07/08 parts - SQUINTS - 08-12-2026
\r\n \r\n that is all that poor 50 did in my garage too..................
\r\n
03/04 zx6 build with 05/06/07/08 parts - kevin09 - 08-12-2026
\r\n \r\n and now the question is what are these connectors for
i dont know what most of them are for and where they go...\r\n
\r\nthese are at the rear by the fuse box and stuff
\r\n
\r\n
\r\n
\r\n
\r\n
\r\n
\r\ni think these are by the crankcase or rear frame motor mounts...
\r\n
\r\n
\r\nthen the rest are more toward the front..
\r\n
\r\n
\r\n
\r\n
\r\n
\r\n
\r\n
\r\n
\r\n
\r\n
\r\n2 more pics i borrowed from buffalo
\r\n
\r\n
\r\n
\r\n
\r\n
03/04 zx6 build with 05/06/07/08 parts - kevin09 - 08-12-2026
\r\n \r\n
\r\n \r\n
\r\n
haha i actually do ride it but its probably been like 3 weeks now but i havent rode my f4i in the lot either for almost that long too haha its all about building this bike now Quote:
\r\n | \r\n \r\n \r\n Originally Posted by SQUINTS\r\n \r\n  \r\n that is all that poor 50 did in my garage too.................. \r\n \r\n | \r\n
\r\n
03/04 zx6 build with 05/06/07/08 parts - StuntBikeJake - 08-12-2026
\r\n \r\n So you are building a 357 as well... I need to rob my suspension and put it on an 03-04\r\n
03/04 zx6 build with 05/06/07/08 parts - kevin09 - 08-12-2026
\r\n \r\n
\r\n \r\n
\r\n
yes sir, since the bike didnt have forks or a rear wheel when i bought it i decided to just upgrade it all anyways Quote:
\r\n | \r\n \r\n \r\n Originally Posted by StuntBikeJake\r\n \r\n \r\n So you are building a 357 as well... I need to rob my suspension and put it on an 03-04 \r\n \r\n | \r\n
\r\n
03/04 zx6 build with 05/06/07/08 parts - loogie - 08-12-2026
\r\n \r\n Bottom pic is cam sensor,then headlight and HL control plug,next one is main ground to frame and rear brake switch,and last one is tail light/signals wiring..The one pic with the chopped wires I have no idea.\r\n
03/04 zx6 build with 05/06/07/08 parts - kevin09 - 08-12-2026
\r\n \r\n
\r\n \r\n
\r\n
ok i got what youre saying except the cam sensor and headlight and hl control plug...........cam sensor is the one that sits right above the headers? does it connect to main harness or what...i cant find a connector that goes to it unless i was overlooking somethingQuote:
\r\n | \r\n \r\n \r\n Originally Posted by loogie\r\n \r\n \r\n Bottom pic is cam sensor,then headlight and HL control plug,next one is main ground to frame and rear brake switch,and last one is tail light/signals wiring..The one pic with the chopped wires I have no idea. \r\n \r\n | \r\n
\r\n
\r\nand the 2 plugs that are dangling are the headlight and hl control?\r\n
03/04 zx6 build with 05/06/07/08 parts - loogie - 08-12-2026
\r\n \r\n
\r\n \r\n
\r\n
Yes,yes and yesQuote:
\r\n | \r\n \r\n \r\n Originally Posted by kevin09\r\n \r\n \r\n ok i got what youre saying except the cam sensor and headlight and hl control plug...........cam sensor is the one that sits right above the headers? does it connect to main harness or what...i cant find a connector that goes to it unless i was overlooking something \r\n \r\n \n \nand the 2 plugs that are dangling are the headlight and hl control? | \r\n
\r\n
03/04 zx6 build with 05/06/07/08 parts - J-Stunt - 08-12-2026
\r\n \r\n
\r\n \r\n
\r\n
You realise we have 5 months of summer and 7 of winter around here right?! Quote:
\r\n | \r\n \r\n \r\n Originally Posted by kevin09\r\n \r\n \r\n haha i actually do ride it but its probably been like 3 weeks now but i havent rode my f4i in the lot either for almost that long too haha its all about building this bike now \r\n \r\n | \r\n
\n
\n
\nBike builds are for winter projects! Get out there and practice before you start breaking that kawi! haha.
\n
\nLooks like you got your hands full with that project, but your well on your way. Make sure you reinforce that frame. Dont skip any corners when your this far tore down. It sucks bad to have to do it later again.
\r\n
03/04 zx6 build with 05/06/07/08 parts - kevin09 - 08-12-2026
\r\n \r\n
\r\n \r\n
\r\n
thanks man, you and johnnyp got me all straight except for the one wire thats cut, but ill figure that out hahaQuote:
\r\n | \r\n \r\n \r\n Originally Posted by loogie\r\n \r\n \r\n Yes,yes and yes \r\n \r\n | \r\n
\r\n
\r\n \r\n
\r\n
haha yeah i realize that but my f4i is pretty much done and all i do with it now is ride to class since its not real safe to stunt right now Quote:
\r\n | \r\n \r\n \r\n Originally Posted by J-Stunt\r\n \r\n \r\n You realise we have 5 months of summer and 7 of winter around here right?! \r\n \r\n \r\n \r\n \r\nBike builds are for winter projects! Get out there and practice before you start breaking that kawi! haha. \r\n \r\nLooks like you got your hands full with that project, but your well on your way. Make sure you reinforce that frame. Dont skip any corners when your this far tore down. It sucks bad to have to do it later again. | \r\n
i will probably whip out the 50 a few times though but im just trying to get the kawi put together to see it in one piece before i do the complete turnaround on it, and im only going to brace the subframe mounts since i want to get a steel frame sometime after my build and maybe one of those steel subframes neal is working on(if the price is right), maybe ill have it put together somewhat by mid october to do the session in the cities with you guys\r\n
\r\nanyways im tearing down my f4i to sell the parts to you guys and later post it on here to get money for this build....\r\n