+- Stuntride (https://stuntride.the-nags.com)
+-- Forum: Stunt Discussion (https://stuntride.the-nags.com/forumdisplay.php?fid=4)
+--- Forum: Help and How To (https://stuntride.the-nags.com/forumdisplay.php?fid=12)
+--- Thread: 06 636 Re-Build (/showthread.php?tid=22301)
06 636 Re-Build - Blackness - 08-12-2026
\r\n \r\n All new plastics just need to prep and shave turn signals
\n
\r\n
06 636 Re-Build - Duane S. - 08-12-2026
\r\n \r\n this is going to be pimp\r\n
06 636 Re-Build - Blackness - 08-12-2026
\r\n \r\n started on the tank tonight so I can get it to my welder for the new lip. Three apply and rinse cycles and she was back to metal again.
\n
\n
\nMy new subframe brace with roundbar. one piece, 1/4" steel easly removable and none of it shows outside the plastic except on the clutch side where it mounts up to my sic subcage
\n
\n
\n
\n
\nstarted workin on some plastics, but the camera went dead.
\n
\nhere is how she sits after tonight
\n
\r\n
06 636 Re-Build - Duane S. - 08-12-2026
\r\n \r\n are you going to use autostrip on the plastics or does that eat it up?\r\n
06 636 Re-Build - Blackness - 08-12-2026
\r\n \r\n
\r\n \r\n
\r\n
I tried it, but it seemed to eat it up. I will be experimenting with other methods. It would be easy, but with all those damn cleared over stickers it might take some time.\r\n
Quote:
\r\n | \r\n \r\n \r\n Originally Posted by Duane S.\r\n \r\n  \r\n are you going to use aircraft stripper on the plastics or does that eat it up? \r\n \r\n | \r\n
06 636 Re-Build - Duane S. - 08-12-2026
\r\n \r\n
\r\n \r\n
\r\n
\nwhats your scheme going to be\r\n
Quote:
\r\n | \r\n \r\n \r\n Originally Posted by Blackness\r\n \r\n \r\n I tried it, but it seemed to eat it up. I will be experimenting with other methods. It would be easy, but with all those damn cleared over stickers it might take some time. \r\n \r\n | \r\n
06 636 Re-Build - DerekS - 08-12-2026
\r\n \r\n Can\'t wait to see this done!\r\n
06 636 Re-Build - StuntBikeJake - 08-12-2026
\r\n \r\n
\r\n
06 636 Re-Build - Blackness - 08-12-2026
\r\n \r\n
\r\n \r\n
\r\n
Im thinking a Charcoal loaded with flake and Kandy orange with some pearl as the accent color. wheels, forks, subcage, roundbar and cage will be done in kandy orange powder. Tripples, rotors and rearsets powdered black. I like the stripe runing down the middle so I might keep that, but there will be some kind of design on the lower and tail.\r\n
Quote:
\r\n | \r\n \r\n \r\n Originally Posted by Duane S.\r\n \r\n \r\n whats your scheme going to be \r\n \r\n | \r\n
06 636 Re-Build - Blackness - 08-12-2026
\r\n \r\n
\r\n \r\n
\r\n
Its on my shelf.\r\n
Quote:
\r\n | \r\n \r\n \r\n Originally Posted by Outlaw_FTP\r\n \r\n \r\n | \r\n