+- Stuntride (https://stuntride.the-nags.com)
+-- Forum: Stunt Discussion (https://stuntride.the-nags.com/forumdisplay.php?fid=4)
+--- Forum: Stunt Companies (https://stuntride.the-nags.com/forumdisplay.php?fid=97)
+--- Thread: On-Point Stunt Parts product Review (/showthread.php?tid=32055)
On-Point Stunt Parts product Review - J Blox - 08-13-2026
\r\n \r\n
\r\n \r\n
\r\n
Oh it\'s soo on!\r\n
Quote:
\r\n | \r\n \r\n \r\n Originally Posted by ADBZ Matt\r\n \r\n  \r\n How about you and I have a stunt comp? Sounds like fun to me... \r\n \r\n   | \r\n
On-Point Stunt Parts product Review - StuntBikeJake - 08-13-2026
\r\n \r\n I got 10 bucks that says blox will toss his bike harder and farther than any other bike at the lot on Oct. 15.. unless someone loops a stoppie while still hauling ass... unless blox does that too..\r\n
On-Point Stunt Parts product Review - ADBZ Matt - 08-13-2026
\r\n \r\n
\r\n \r\n
\r\n
\nI really dont see where I am going to have to cut my farings at all... I held the parts up to the bike last night... I\'ll Let you know for sure after installation.\r\n
Quote:
\r\n | \r\n \r\n \r\n Originally Posted by loogie\r\n \r\n \r\n Current design. \r\n \r\n | \r\n
On-Point Stunt Parts product Review - ADBZ Matt - 08-13-2026
\r\n \r\n
\r\n \r\n
\r\n
\nNice... Lets think of some comps...Quote:
\r\n | \r\n \r\n \r\n Originally Posted by J Blox\r\n \r\n \r\n Oh it\'s soo on! \r\n \r\n | \r\n
\n1. Longest endo
\n2. Longest no throttle hand idle wheelie
\n3. Last man standing seat stander
\n4. circle comp to 5 circles
\n5. first one to 10 circle burnouts
\n
\n
\nThrow some ideas out there... Ref Rowdy wil be the judge...
\r\n
On-Point Stunt Parts product Review - Righteous 1 - 08-13-2026
\r\n \r\n
\r\n \r\n
\r\n
Gotta say......I think they look bad-ass mounted up!! Quote:
\r\n | \r\n \r\n \r\n Originally Posted by ROWDY\r\n \r\n \r\n That is hands down the ugliest crash cage I have ever seen \r\n \r\n  | \r\n
\r\n
\r\nDefinetely the stoutest cage on the market, IMO.
\r\n
\r\n......and +1 to the engineering thats gone into these cages. You can tell they were professionaly engineered.
\r\n
On-Point Stunt Parts product Review - Righteous 1 - 08-13-2026
\r\n \r\n
\r\n \r\n
\r\n
\r\nAhhhhhhhh........if Beardo was going........I\'d make that bet!! Quote:
\r\n | \r\n \r\n \r\n Originally Posted by StuntBikeJake\r\n \r\n \r\n I got 10 bucks that says blox will toss his bike harder and farther than any other bike at the lot on Oct. 15.. unless someone loops a stoppie while still hauling ass... unless blox does that too.. \r\n \r\n | \r\n
\r\n
On-Point Stunt Parts product Review - ROWDY - 08-13-2026
\r\n \r\n
\r\n \r\n
\r\n
I fixed it for yaQuote:
\r\n | \r\n \r\n \r\n Originally Posted by ADBZ Matt\r\n \r\n \r\n Nice... Lets think of some comps... \r\n \r\n \n1. Longest endo 150ft approach \n2. Most no throttle hand circle \n3. Last man standing seat stander \n4. circle comp to 5 circles \n5. first one to do a spreader circle \n \n \nThrow some ideas out there... Ref Rowdy wil be the judge... | \r\n
\r\n
On-Point Stunt Parts product Review - ROWDY - 08-13-2026
\r\n \r\n
\r\n \r\n
\r\n
The craftsmanship looks nice indeed, but I dont like how the sliders point down. And Im sure it weighs a ton. Matt u need to weigh ur current cage vs the On Point design. If your adding weight over your current setup then your going the wrong direction. Thats my Quote:
\r\n | \r\n \r\n \r\n Originally Posted by Righteous 1\r\n \r\n \r\n Gotta say......I think they look bad-ass mounted up!! \r\n \r\n \n \nDefinetely the stoutest cage on the market, IMO. \n \n......and +1 to the engineering thats gone into these cages. You can tell they were professionaly engineered. | \r\n
\r\n
On-Point Stunt Parts product Review - ADBZ Matt - 08-13-2026
\r\n \r\n
\r\n \r\n
\r\n
\nDont want to disagree with you, but I dont think it would be fair, because my current cage is a homemade tank, and would def outweigh the new cage, and it has solid bar in it...Quote:
\r\n | \r\n \r\n \r\n Originally Posted by ROWDY\r\n \r\n \r\n The craftsmanship looks nice indeed, but I dont like how the sliders point down. And Im sure it weighs a ton. Matt u need to weigh ur current cage vs the On Point design. If your adding weight over your current setup then your going the wrong direction. Thats my \r\n \r\n | \r\n
\n
\nAs far as the sliders being angled down, dont you think that would reduce the impact that bends the cage, because on traditional cages the side of the slider always grinds off at an angle...
\n
\nAs far as the new cage, it looks beefy, but isnt really that heavy... but I have never owned anything other than an FI cage, that i owned before I had the current cage made, so not sure i can even be a reliable source to verify the weight aspect.
\n
\nI will weigh the cage, and see if anyone has any specs to compare against tho.\r\n
On-Point Stunt Parts product Review - Chadf - 08-13-2026
\r\n \r\n It didn\'t feel heavier to me....
\n
\nIt\'s a dope looking cage when its in your hand. Alot of r&d went into this cage, u can tell it when u look at it in depth.
\n
\nWe all know he\'s gonna beat the snot outta of it.\r\n