+- Stuntride (https://stuntride.the-nags.com)
+-- Forum: Stunt Discussion (https://stuntride.the-nags.com/forumdisplay.php?fid=4)
+--- Forum: Projects and Builds (https://stuntride.the-nags.com/forumdisplay.php?fid=104)
+--- Thread: 04 636 build (/showthread.php?tid=34267)
Pages:
1
2
04 636 build - StuntBikeJake - 12-02-2011
Sounds like I need to see what it will take to mod my stock footbrake holder to hold a honda caliper since I have several of them.. and buy a bigger rotor so I can finally upgrade to a big rotor and see what the hype is about..
/threadjack... sorry
04 636 build - Liudas - 12-02-2011
Thanks for advises guys, because I am thinking about building one 636 too some time.
04 636 build - redstar - 12-02-2011
Quote:
|
Originally Posted by StuntBikeJake
 Any 05-08 kawi front end will work. You will need the forks, rotors, fender, calipers. Just use your 03-04 triples and slide your new forks into those triples.
|
04 636 build - 808BMW - 12-02-2011
Any calipers will work, the main thing is that your rotors and forks are from matching years, otherwise you might need spacers.
The black nissin calipers from 07+ zx6r and also newer zx10r's are an upgrade, I have them up front and they are way stiffer than my stock 04 calipers.
04 636 build - StuntBikeJake - 12-02-2011
Quote:
|
Originally Posted by redstar
Calipers to? I am using my 04 calipers with 05 forks and rotor. Seems to be fine. Never knew about 05 calipers also.
|
04 636 build - navajowalks - 12-02-2011
Quote:
|
Originally Posted by redstar
Calipers to? I am using my 04 calipers with 05 forks and rotor. Seems to be fine. Never knew about 05 calipers also.
|
Quote:
|
Originally Posted by StuntBikeJake
Like stated above if running a different year of calipers than front end then you may need spacers.. My buddy found this out the hard way.
|
04 636 build - Raider - 12-03-2011
Only time they would dig is if you put 05 rotors on and used 03 forks....
04 636 build - StuntBikeJake - 12-03-2011
My 08 front end is on my bike. I was referring to another guys bike here..
04 636 build - navajowalks - 12-03-2011
Quote:
|
Originally Posted by tin-man
i have 04 rotors on my 05 front end conversion seems to be fine so far been about 2 months ive had em on there
 |
Quote:
|
Originally Posted by StuntBikeJake
My 08 front end is on my bike. I was referring to another guys bike here..
|