+- Stuntride (https://stuntride.the-nags.com)
+-- Forum: Stunt Discussion (https://stuntride.the-nags.com/forumdisplay.php?fid=4)
+--- Forum: Help and How To (https://stuntride.the-nags.com/forumdisplay.php?fid=12)
+--- Thread: Clutch (/showthread.php?tid=19706)
Pages:
1
2
Clutch - ScarryJerry - 10-23-2010
My clutch is running super stiff on my 636 (05). I tried Teflon and wd40 usually in the past it helps on dirtbikes but was thinkin dirt isn't in the lines. So does that mean the cable might be shot or need to replace bearings in the clutch assymbally or new clutch. Works fine shifts great and kicks to do wheelies and all that so any one know what it could be if I didn't mention it? I compared the stiffness in clutch with 3 different bikes. And what exactally dies the ez pull clutch levers do?
Clutch - Righteous 1 - 10-23-2010
An easy pull lever increases the leverage input from your finger by moving the pivot point of the clutch cable closer to the pivot point of the clutch lever. Overall result is a tad less overall clutch cable pull as far as distance goes, but a much easier pull on the lever. Super Streetbike tested the RSC, and it had less than half the resistance of a stock lever(17 pounds compared to 7.5 pounds for the RSC). If your cable is in decent shape and is lubed, you'ld benefit greatly from the worlds finest easy pull! Hit the "Righteous" link in my sig!
Clutch - Doodle - 10-23-2010
try a new cable first,i've lubed the living shit out of worn out cables but they still drag inside..they kink and frey and just become doodoo butter..
Clutch - ScarryJerry - 10-23-2010
You liar just promoting haha jk I think I'm gunna get an easy pull just gunna go for a new cable when I can't pull it anymore. And your RCS sounds like it's the shit. I'm gunna get one eventually still need hand brake and steel braided lines for the 636. But easy pulls sound the way to go when I'm pullin in clutch all day practicing.
Clutch - vegasrider2005 - 10-23-2010
Quote:
|
Originally Posted by killinthatgreenbike
 You liar just promoting haha jk I think I'm gunna get an easy pull just gunna go for a new cable when I can't pull it anymore. And your RCS sounds like it's the shit. I'm gunna get one eventually still need hand brake and steel braided lines for the 636. But easy pulls sound the way to go when I'm pullin in clutch all day practicing.
|
Clutch - ScarryJerry - 10-23-2010
I'm workin on it. It's tough. Any tips for getting the front up fast besides reving and pulling hard? Like grip wise? Seems like It either goes up half way or wants to spin.
Clutch - vegasrider2005 - 10-23-2010
Quote:
|
Originally Posted by killinthatgreenbike
I'm workin on it. It's tough. Any tips for getting the front up fast besides reving and pulling hard? Like grip wise? Seems like It either goes up half way or wants to spin.
|
Clutch - 636ReD - 10-23-2010
i have the moose ez pull but i just checked out that (RSC) i believe im gona convert looks sick anyone have a comparison on the two wich feels better moose os ok but i want better quality (RSC) looks like it has what im looking for but does it pull ass ez or ezier
Clutch - 636ReD - 10-23-2010
and whats the quality of it
Clutch - lee majors - 10-23-2010
Quote:
|
Originally Posted by vegasrider2005
thats clutch control, if your back tire is spinning its too much throttle and dropping the clutch too hard, if its not coming up enough add more throttle
|
and put your weight(ass) more towards the back of the bike. i have a feeling your hugging the front end